Onza Orbita 170 Black Street Only £49.95

Trials Cranksets Mountain bikes
Read More...
Our Price: £49.95
This item is out of stock
Postage to United Kingdom
on this item is FREE

Product Description

Brand : DDG / Onza
Model: Orbita 170 Black Street
A tough uncompromising street trials crank set.
175 mm chunky square taper drive cranks.
Threaded tough steel inserts in the pedal holes, helps to prevent stripped threads.
Fitted 7075 T6 light alloy screw–on bash ring.
Bash Ring fitted with Patented stainless steel outer ring for minimum weight and maximum toughness.
Bashring fitted with bolt on replaceable stainless steel 22 tooth 3/32” pitch chainring.
Weight: Cranks alone ----- . Cranks Complete with Guard and Chainring-----

For a strong but relatively light weight street trials crankset there is little to compete with this little beauty. Suitable for most 26” wheel Stock Trials bikes, this crank represents great value.

Ensure that your pedals are tightened to at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides. Before fitting, it's also a good idea to make sure your pedal axles are clean (a wire brush works well) then greased before installation.
Similarly, always check crank bolt torque is at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides, then each and every ride after that.
Failure to keep your pedals or crank bolts tight as described above is likely to damage your cranks and this will not be covered under warranty.

Please note that the minimum required thread contact between crank arm and sprocket/freewheel is 7mm, and a 1.37" sprocket/freewheel with maximum internal thread diameter 33.80mm (NOT 1.375") must be used. Failure to adhere to this instruction will damage the cranks threads and this is not covered under warranty.